Print
Print
CPF520-6
This model is designed for situations where large volumes are needed in a short period. Both models have a high tap level that are ideal for filling cafetieres, tall jugs or teapots.
Features and Benefits
- Integral seven day programmable timer
- Built-in multi-purpose filtration
- Energy saving ECO mode
- Temperature programmable between 80°C – 98°C
- Two tier comprehensive diagnostics system
- Integral stainless steel drip tray included
- Programmable filter monitor from 2,000 — 19,500 litres
Plumbing
Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and choice of rear or front overflow.
Electrical
Supplied with 1.6 metres of cable for connection to a 230 volt supply with a suitable break capacity of 30 amps.
Construction
Brushed stainless steel case.
Stainless steel heating chamber.
Low voltage switching.
Two safety cut-outs.
Download Full Specification Sheet
Download Installation & User Manual
SPECIFICATION FOR CPF520-6
- Height (mm) 705
- Width (mm) 360
- Depth (mm) 555
- Tap clearance to drip tray (mm) 304
- Rear connection clearance (mm) 45
TECHNICAL DATA FOR CPF520-6*
- Power loading (kW) 6
- Heat-up time (mins) 24
- Recovery Rate (litres) 1
- Stand by Power (kW/h) 0.1
- Rapid Draw-Off (litres) 19
- Hourly Output (litres) 57
- Hourly Output (cups) 340
- Based on 6 Cups Per Litre
